pitted fork legs

Best tyres, Suspension setup, Accessories...
Post Reply
User avatar
lawzer
Just Passed
Posts: 54
Joined: Thu Jan 09, 2003 5:03 pm
Location: Abirdeen min!

pitted fork legs

Post by lawzer »

got a friends scooter with fairly badly pitted and roosty fork legs.
it's the one that sat for a few years in someones back garden....

anyway, bothe fork seals are leaking and although i can change the seals i'm worried they'll just pop again.


any remidies for this? fine sandpaper and rub the corrosion off or can they be replated?
Cossackmannie
Indeed!
Posts: 114
Joined: Thu May 01, 2003 10:25 am
Current Ride: 1979 DT175MX
1987 Big Mans Wanger K75S
1981 GP100
2005 Jianshe JC90 Dax copy with Lifan 125 motor
Location: In the garage, looking for that 2.65 valve shim I just dropped..

Re: pitted fork legs

Post by Cossackmannie »

If you can be ersed with the spanner work, the stanchions should be cheap enough to justify the swap. Otherwise, it's the usual 1200 wet and dry, araldite, wet and dry scenario which will only last so long. Fine if it's just a wee hack or for punting on but, if it's a keeper, probably worth swapping the stanchions.
User avatar
crankcase
Tube steak
Posts: 77
Joined: Sun Aug 07, 2005 10:24 pm
Current Ride: GSXR750k4
Location: Under a stone

Re: pitted fork legs

Post by crankcase »

I got both stanchions rechromed on a GS500 I had years ago.
Tried Araldite, liquid metal etc etc. Fine for a stop gap fix.
Couldn't find anybody local and had to send them down to Englandshire.
Was justified compared to cost of new but a scooter ? Likely pretty cheap ???
Sorry can't remember the company but I got the number in MCN.
User avatar
Gazza
I don't believe it!
Posts: 2475
Joined: Mon Sep 10, 2001 1:00 am
Current Ride: KTM 690 Duke
Location: Sconny Botland

Re: pitted fork legs

Post by Gazza »

I would leave it.


Being a scooter it'll be pretty slow and boring. Having fork oil run down ito the brakes will liven it up no end. :2up
User avatar
Ninja Winja
Direct Access
Posts: 23
Joined: Tue Jan 16, 2007 3:08 pm
Current Ride: Aprilia Shiver, Honda Cityfly
Location: Portlethen

Re: pitted fork legs

Post by Ninja Winja »

I used superglue and wet and dry paper on small pits on an old z250's forks years ago. Did the trick for about a year.
Tried breaking point for scooter forks?
User avatar
Zax
Derren Brown
Posts: 1443
Joined: Sun Mar 23, 2003 6:48 pm
Location: Out in the boonies

Re: pitted fork legs

Post by Zax »

There was a guy on the site that was set up in business doing chrome an dother plating

I think that I wass Scotty303

Do a search for gold plating he may be able to help.
User avatar
airwave
Tank Slapper
Posts: 690
Joined: Fri Mar 25, 2005 10:06 pm
Current Ride: Yam MT10, 'Rox Scoota (currently on trailer of shame, still leaking oil . . from somewhere internal . .
Location: Stoney (sometimes)

Re: pitted fork legs

Post by airwave »

Gazza wrote:I would leave it.


Being a scooter it'll be pretty slow and boring. Having fork oil run down ito the brakes will liven it up no end. :2up
:2up

Had the cage washed here last week, was covered in "honey grease" from the E-line winch (nasty, sticky stuff) the boys at the local *cof* Detailing workshop *cof* put it up on the ramp and blew Diesel all over / under it to break the grease up.
they then washed it off the paintwork (mostly) I paid them the 5 quid for all 6 of them who'd been on it for an hour and took off back to work.

All was well for, ooh, seconds and seconds 'till I actually had to apply the brakes coming up to the first roundabout ("Circle" for the Dundee massive)
:eek
Diesel blown onto yer brake disks fairly prevents wear on them
:log
Post Reply