has anyone got access to a Lathe?
i got aluminium spacer rings for the forks on my bandit (more preload) but they're 20mm....... which gives a fairly exiting ride.
so i'd like to trim them (and i dont trust myself with a hacksaw!) to 10mm.
cheers folks
Machining
- speedaddictedberk
- Knee Flapper
- Posts: 296
- Joined: Fri Jan 23, 2004 8:34 pm
- Current Ride: Speed Triple 1050, GPZ600R, K100Rt
- Location: Aberdeen ish
- al
- Mass Debater
- Posts: 4768
- Joined: Wed Sep 05, 2001 1:00 am
- Current Ride: Space Hopper
- Location: Uranus
- Contact:
Re: Machining
Did you change to 15wt oil at the same time????speedaddictedberk wrote:has anyone got access to a Lathe?
i got aluminium spacer rings for the forks on my bandit (more preload) but they're 20mm....... which gives a fairly exiting ride.
so i'd like to trim them (and i dont trust myself with a hacksaw!) to 10mm.
cheers folks
The spacers are to correctly set the static sag on the forks.
- Shrek
- Tank Slapper
- Posts: 677
- Joined: Mon Apr 14, 2003 9:03 pm
- al
- Mass Debater
- Posts: 4768
- Joined: Wed Sep 05, 2001 1:00 am
- Current Ride: Space Hopper
- Location: Uranus
- Contact:
This town Isn't big enough for the both of us!!!Shrek (formaly known as scotty) wrote:Big Kneed Al (master of the emergency stop & "stand up" comedian) (Super Nanny) you should change your name to “The sheriffâ€￾
Every time a Bandit is mentioned your there… do you receive text alerts or something?
:I can't believe it's not butter!