ZZR 600 2000 PLATE
- stitch82
- Chopper
- Posts: 229
- Joined: Fri Oct 14, 2011 7:27 pm
- Current Ride: kawasaki ZZR 600
- Location: Aberdeen
ZZR 600 2000 PLATE
Hi folks. I am riding my 1st big bike(kwak ZZR 600 only picked up on 22/11/11). When was out today the bike was wanting to veer off to the same direction of the wind and find myself fighting with the bike (50mph +) is this normal in wind or is it something else? I have a new rear tyre on and tyre pressures should be correct. Also my left hand seems to be getting quite stiff after riding, could this be my riding style?
Any advise would be welcome and much appreciated
Any advise would be welcome and much appreciated
- Zathos
- Mr Magpie
- Posts: 3161
- Joined: Sun Apr 27, 2003 10:46 pm
- Current Ride: Aprilia Tuono Factory R
- Location: Everywhere & Nowhere
Re: ZZR 600 2000 PLATE
The ZZR is a wee bit slab sided and will be affected by wind. It is a little disconcerting at first, but all bikes suffer buffeting to some degree or other.
Stiff hands could be a sign of being tense on the bike. It will also affect shoulders.
Stiff hands could be a sign of being tense on the bike. It will also affect shoulders.
- stitch82
- Chopper
- Posts: 229
- Joined: Fri Oct 14, 2011 7:27 pm
- Current Ride: kawasaki ZZR 600
- Location: Aberdeen
Re: ZZR 600 2000 PLATE
Take it there is no way to minimise the veering off, at the time felt like I was coming off the road put could be panicing but braking seemed to have pulled it back in line, when you say slab sided what is meantZathos wrote:The ZZR is a wee bit slab sided and will be affected by wind. It is a little disconcerting at first, but all bikes suffer buffeting to some degree or other.
Stiff hands could be a sign of being tense on the bike. It will also affect shoulders.
- Zathos
- Mr Magpie
- Posts: 3161
- Joined: Sun Apr 27, 2003 10:46 pm
- Current Ride: Aprilia Tuono Factory R
- Location: Everywhere & Nowhere
Re: ZZR 600 2000 PLATE
When looking at the side of the bike it is a big flat shape. If the wind hits the side it acts like a sail and pushes the bike. Even worse when the wind isn't constant as it can be difficult to predict.
The long wheelbase on the ZZR makes it more prone to wind than physically smaller bikes.
Applying a wee bit of brake will firm up the suspension and create a gyroscopic effect to straighten up the bike. Hence the reason it is damn hard to turn and brake at the same time
A wee dod of rear brake can help pull the bike upright, but your best friend is counter steering.
Sounds daft but if you want the bike to go right push the end of the right handlebar away from you slightly. This will initiate a dip to the right, then normal steering takes over.
Gentle movements are the key. Practice on a straight road to get the feel. it will help with small corrections like wind buffeting.
You do get used to it and I'm sure others will have tips to help
The long wheelbase on the ZZR makes it more prone to wind than physically smaller bikes.
Applying a wee bit of brake will firm up the suspension and create a gyroscopic effect to straighten up the bike. Hence the reason it is damn hard to turn and brake at the same time
A wee dod of rear brake can help pull the bike upright, but your best friend is counter steering.
Sounds daft but if you want the bike to go right push the end of the right handlebar away from you slightly. This will initiate a dip to the right, then normal steering takes over.
Gentle movements are the key. Practice on a straight road to get the feel. it will help with small corrections like wind buffeting.
You do get used to it and I'm sure others will have tips to help
- steve
- Tank Slapper
- Posts: 700
- Joined: Fri Dec 14, 2007 11:10 pm
- Current Ride: Hmmm I wonder
- Location: Here
Re: ZZR 600 2000 PLATE
Is your back wheel straight in the swinging arm ? I badly adjusted rear wheel could cause the bike to veer to one side , defo worth checkin it out as it's a bit of a safety issue
- stitch82
- Chopper
- Posts: 229
- Joined: Fri Oct 14, 2011 7:27 pm
- Current Ride: kawasaki ZZR 600
- Location: Aberdeen
Re: ZZR 600 2000 PLATE
Ok thanks prob my inexperaince showing Zathos that makes a lot of sense, but is it worth putting on stiffer/after market rear suspension to stabalize the bike bit better, some researching in some forums i`ve done last wee while are saying this helps so hard to tell whats fact sometimes.
Steve that would be worth looking at for sure,thing is its going to be anoying if that is the case as just been serviced at Eccosse before I picked it from them, also there is a break in the veering off and is not constant
Steve that would be worth looking at for sure,thing is its going to be anoying if that is the case as just been serviced at Eccosse before I picked it from them, also there is a break in the veering off and is not constant
- steve
- Tank Slapper
- Posts: 700
- Joined: Fri Dec 14, 2007 11:10 pm
- Current Ride: Hmmm I wonder
- Location: Here
Re: ZZR 600 2000 PLATE
A mate of mine has a ZZR600 , its a few years newer than yours and he loves it , he hasn't modified it at all from standard , he has set the rear shock on it's hardest pre load setting as he takes a pillion alot , if I were you I would ask a much more experienced rider than yourself to ride the bike to see if they can identify any potential problems or safety issues with your bike , if there is issues with your bike your not happy with I suggest you go back to Ecosse and tell them
- The Rossi Kid
- Make way for Noddy
- Posts: 1765
- Joined: Thu Aug 05, 2004 3:08 pm
- Location: For you to know and me to find out
Re: ZZR 600 2000 PLATE
I'm off the rest of the week if you want a second pair of eyes to look at it or take it for a spin. If you're happy with that then I'll get googling some standard suspension settings and make sure it's on a base setting, set up the static sag for your weight (assuming we have enough adjustment) and take it from there.
- stitch82
- Chopper
- Posts: 229
- Joined: Fri Oct 14, 2011 7:27 pm
- Current Ride: kawasaki ZZR 600
- Location: Aberdeen
Re: ZZR 600 2000 PLATE
That would be brill bud, very much appriciated i`m free from 1300-1430 today/thur. all day friday after 1300 and till 1630 sat. If you could help I would be in debt to youThe Rossi Kid wrote:I'm off the rest of the week if you want a second pair of eyes to look at it or take it for a spin. If you're happy with that then I'll get googling some standard suspension settings and make sure it's on a base setting, set up the static sag for your weight (assuming we have enough adjustment) and take it from there.
pm me and could give you my mob n.o
- The Rossi Kid
- Make way for Noddy
- Posts: 1765
- Joined: Thu Aug 05, 2004 3:08 pm
- Location: For you to know and me to find out
Re: ZZR 600 2000 PLATE
OK, we'll go for tomorrow pm. Haven't found a standard setting online for the 2000 model specifically but have found several sources quoting these as good setting for the road, what do the previous owners on here (Zathos, MeepMeep) make of them?
Front:
Preload: 6 lines showing
Rebound: 1.5 turns out from full
Compression:two turns out from full
Rear:
Preload: 9mm thread showing
Rebound: Full
Compression: 1.5 turns out from full
Front:
Preload: 6 lines showing
Rebound: 1.5 turns out from full
Compression:two turns out from full
Rear:
Preload: 9mm thread showing
Rebound: Full
Compression: 1.5 turns out from full
- stitch82
- Chopper
- Posts: 229
- Joined: Fri Oct 14, 2011 7:27 pm
- Current Ride: kawasaki ZZR 600
- Location: Aberdeen
Re: ZZR 600 2000 PLATE
Ok Rossi thats great I will pm you my number so you could txt me a meeting place etcThe Rossi Kid wrote:OK, we'll go for tomorrow pm. Haven't found a standard setting online for the 2000 model specifically but have found several sources quoting these as good setting for the road, what do the previous owners on here (Zathos, MeepMeep) make of them?
Front:
Preload: 6 lines showing
Rebound: 1.5 turns out from full
Compression:two turns out from full
Rear:
Preload: 9mm thread showing
Rebound: Full
Compression: 1.5 turns out from full
- stitch82
- Chopper
- Posts: 229
- Joined: Fri Oct 14, 2011 7:27 pm
- Current Ride: kawasaki ZZR 600
- Location: Aberdeen
Re: ZZR 600 2000 PLATE
Thanks "The Rossi Kid". I defo have a better understanding of things and feel more confident about things and will continue to practise what you said when the weather allows, any time I can return the favour please ask (used to work as sky engineer for AVC). Funny how the simplest of things make a big difference really enjoyed things today and learnt allot