BRAKES
- stitch82
- Chopper
- Posts: 229
- Joined: Fri Oct 14, 2011 7:27 pm
- Current Ride: kawasaki ZZR 600
- Location: Aberdeen
BRAKES
How about a brakes section?
Any way changed my lines to HEL braided lines and seems to be better than the standard rubber lines
Whats everyones thoughts on pads as I need to change the rear and front pads- What make? What type(sinthered or other). Will be for my ZZR 600 every where i`ve looked seems the same! Thoughts any one
Any way changed my lines to HEL braided lines and seems to be better than the standard rubber lines
Whats everyones thoughts on pads as I need to change the rear and front pads- What make? What type(sinthered or other). Will be for my ZZR 600 every where i`ve looked seems the same! Thoughts any one
- missile
- Candle in the wind.
- Posts: 661
- Joined: Thu Sep 06, 2001 1:00 am
- Current Ride: Virtual rider
- Location: Ride hard or stay home
- Contact:
Re: BRAKES
IMHO, you are unlikely to brake hard enough to find any benefit from braided lines on the road,
but they do look good
Service your brakes once a year.
Clean all component parts.
Check pistons are free and use high temp lube (I can't believe it's not butter!).
Fluid degrades change it for fresh.
Change your pads long before they reach the minimum recommended thickness.
Use OEM or a.n.other well known manufacturer.
It is not rocket science, but if you do not know what you are doing, leave it to someone who does.
but they do look good
Service your brakes once a year.
Clean all component parts.
Check pistons are free and use high temp lube (I can't believe it's not butter!).
Fluid degrades change it for fresh.
Change your pads long before they reach the minimum recommended thickness.
Use OEM or a.n.other well known manufacturer.
It is not rocket science, but if you do not know what you are doing, leave it to someone who does.
- Akrapovic
- ZZR1400.....Just like a Golf
- Posts: 1971
- Joined: Thu Mar 02, 2006 10:37 am
- Current Ride: ZX10R and MT-10.
- Location: Either grafting, down the pub, being a hermit or at a track-day.
- Contact:
Re: BRAKES
I have sintered, dual carbon pads and HEL braided lines on the track-b1ke. You will only find the real use of them there. However the HEL lines do look good and add some bling. I have a contact for a good price if your interested.
For me and as Missile says, stick with standard pads until you find that they are not doing their job.
Thats when you need to buy a track-b1ke.
For me and as Missile says, stick with standard pads until you find that they are not doing their job.
Thats when you need to buy a track-b1ke.
- al
- Mass Debater
- Posts: 4768
- Joined: Wed Sep 05, 2001 1:00 am
- Current Ride: Space Hopper
- Location: Uranus
- Contact:
Re: BRAKES
Do not under estimate the significance of cleaning the calipers & making sure the pistons are free. I've seen folk spend a fortune on braided hoses, fancy brake fluid, and HH pads only for their pistons to be seized.
A good clean with some aerosol brake cleaner then, one at a time, clean the sides of the pistons with fresh brake fluid using q-tips/cotton buds. Carefully, making sure the pistons you are not working on don't move, pump out the pistons slightly to get it properly clean before pushing it back in. You should be able to push it back with your fingers. If not you may want to get the calipers serviced properly.
Do keep an eye on the master cylinder when you do push the pistons in just incase some of the brake fluid overflows.
Big Kneed Al (master of the emergency stop & "stand up" comedian).
A good clean with some aerosol brake cleaner then, one at a time, clean the sides of the pistons with fresh brake fluid using q-tips/cotton buds. Carefully, making sure the pistons you are not working on don't move, pump out the pistons slightly to get it properly clean before pushing it back in. You should be able to push it back with your fingers. If not you may want to get the calipers serviced properly.
Do keep an eye on the master cylinder when you do push the pistons in just incase some of the brake fluid overflows.
Big Kneed Al (master of the emergency stop & "stand up" comedian).
- steve
- Tank Slapper
- Posts: 700
- Joined: Fri Dec 14, 2007 11:10 pm
- Current Ride: Hmmm I wonder
- Location: Here
Re: BRAKES
Braided lines WILL make the brakes on your bike much better
- al
- Mass Debater
- Posts: 4768
- Joined: Wed Sep 05, 2001 1:00 am
- Current Ride: Space Hopper
- Location: Uranus
- Contact:
Re: BRAKES
Providing the calipers work.steve wrote:Braided lines WILL make the brakes on your bike much better
- Ratz
- Anyone for cricket?
- Posts: 382
- Joined: Thu Jul 12, 2007 1:05 pm
- Current Ride: Jedi Speeder Bike
- Location: Where the farce may lead!
Re: BRAKES
and you put the pads in the right way round!!!!!Big Kneed Al (master of the emergency stop & "stand up" comedian) wrote:Providing the calipers work.steve wrote:Braided lines WILL make the brakes on your bike much better
- steve
- Tank Slapper
- Posts: 700
- Joined: Fri Dec 14, 2007 11:10 pm
- Current Ride: Hmmm I wonder
- Location: Here
Re: BRAKES
Very true Big Kneed Al (master of the emergency stop & "stand up" comedian) an Ratz , I always fit EBC HH pads an I think they work great on my bike
- missile
- Candle in the wind.
- Posts: 661
- Joined: Thu Sep 06, 2001 1:00 am
- Current Ride: Virtual rider
- Location: Ride hard or stay home
- Contact:
Re: BRAKES
In YOUR mind.steve wrote:Braided lines WILL make the brakes on your bike much better
- steve
- Tank Slapper
- Posts: 700
- Joined: Fri Dec 14, 2007 11:10 pm
- Current Ride: Hmmm I wonder
- Location: Here
Re: BRAKES
missile wrote:In YOUR mind.steve wrote:Braided lines WILL make the brakes on your bike much better
You obviously know better as usual , please inform us how rubber lines are better than steel braided lines
- missile
- Candle in the wind.
- Posts: 661
- Joined: Thu Sep 06, 2001 1:00 am
- Current Ride: Virtual rider
- Location: Ride hard or stay home
- Contact:
Re: BRAKES
I saidsteve wrote:missile wrote:In YOUR mind.steve wrote:Braided lines WILL make the brakes on your bike much better
You obviously know better as usual , please inform us how rubber lines are better than steel braided lines
On this occasion YOU claim to know better.IMHO, you are unlikely to brake hard enough to find any benefit from braided lines on the road,
but they do look good
- steve
- Tank Slapper
- Posts: 700
- Joined: Fri Dec 14, 2007 11:10 pm
- Current Ride: Hmmm I wonder
- Location: Here
Re: BRAKES
Well on my bikes I noticed a massive difference and improvement after I fitted braided lines , the brakes feel much more positive and the spongy feeling that rubber lines give is gone , that's surely got to be a good thing for any bike , I personally wouldn't feel as confident with my brakes if I had rubber brake lines , if you don't agree with me that's your choice
- missile
- Candle in the wind.
- Posts: 661
- Joined: Thu Sep 06, 2001 1:00 am
- Current Ride: Virtual rider
- Location: Ride hard or stay home
- Contact:
Re: BRAKES
I am sorry that I appear to have caused you offence.
Enjoy your ride
Enjoy your ride
- granderson70
- Direct Access
- Posts: 2
- Joined: Wed May 25, 2011 6:34 pm
- Current Ride: Daytona 900
Re: BRAKES
The main benefit I get from braided lines is much better feel. Like others said we shouldn't need to use our brakes to find out if they give overall better stopping power. HEL/Goodridge, etc. all the same but I always BUY BRITISH!
I've changed over to braided on half a dozen bikes and it's always an improvement, sometimes small sometimes huge. It's one of the cheapest, best & easiest upgrades you can do. First time I did it was on the rear brake of a Truimph sprint. The brake went from nothing/locked wheel to something I could really use and it changed my town riding on that bike significantly.
I always go for HH sintered pads from EBC and always been happy. And like Big Kneed Al (master of the emergency stop & "stand up" comedian) says do learn to clean your calipers, this should be easy enough if you have ones that split in half to get to pistons on both sides. Monbloc (like yammy blue/gold spots) are a pain to get the pistons out of. I find a brass 'chimney sweep' type brush attachment on a dremel was excellent for cleaning out the crud in the seals' grooves.
The one thing I am slow to change is the discs and that is purely a cost thing. I don't have much aftermarket experience to rate one make or another but I would tend to buy a known brand (EBC?)- never cheap out on brakes or tyres! That reminds me I am overdue to get some just now for the Daytona ....
I've changed over to braided on half a dozen bikes and it's always an improvement, sometimes small sometimes huge. It's one of the cheapest, best & easiest upgrades you can do. First time I did it was on the rear brake of a Truimph sprint. The brake went from nothing/locked wheel to something I could really use and it changed my town riding on that bike significantly.
I always go for HH sintered pads from EBC and always been happy. And like Big Kneed Al (master of the emergency stop & "stand up" comedian) says do learn to clean your calipers, this should be easy enough if you have ones that split in half to get to pistons on both sides. Monbloc (like yammy blue/gold spots) are a pain to get the pistons out of. I find a brass 'chimney sweep' type brush attachment on a dremel was excellent for cleaning out the crud in the seals' grooves.
The one thing I am slow to change is the discs and that is purely a cost thing. I don't have much aftermarket experience to rate one make or another but I would tend to buy a known brand (EBC?)- never cheap out on brakes or tyres! That reminds me I am overdue to get some just now for the Daytona ....
- stitch82
- Chopper
- Posts: 229
- Joined: Fri Oct 14, 2011 7:27 pm
- Current Ride: kawasaki ZZR 600
- Location: Aberdeen
Re: BRAKES
Much appreciated folks for your thoughts, got front and rear pads ebc and cleaning calipers when change pads.disks seem ok Thanks again folks